Defy DCY 8402 GM Manual

Contents

Defy DCY 8402 GM Manual Manual pdf 21 page image

21 / 28 ENDryer / User ManualOperating the product5.13 Changing the program after it isstartedAfter the machine starts running, you can changethe program you selected to dry your laundry with adifferent program.1. For example, to select Extra Dry program insteadof the Iron Dryness, stop the program by pressingthe Start / Pause button.2. Turn the Program Selection knob to select theExtra Dry program.3. Start the program by pressing the Start / Pausebutton.Adding and removing laundry in stand-by modeIf you want to add or remove laundry after the dryingprogram starts:1. Press the Start/Pause button to take the machineinto Stand-by mode. Drying operation stops.2. Open the loading door, add or remove laundry andclose the loading door.3. Start the program by pressing the Start / Pausebutton.C The laundry adding made after the dryingoperation started may cause the driedlaundry inside the machine to mix withthe wet laundry and the laundry to remaindamp after the operation ends..C Laundry adding and removing can berepeated as much as desired duringdrying operation.But this process would continuouslyinterrupt the drying operation, and sowould cause the program durationto lengthen and increase energyconsumption. Thus, it is recommended toadd laundry before the program starts.C If a new program is selected by changingthe position of the program selection knobwhile your machine is in stand-by mode,the running program ends.Do not contact the inner surface of thedrum when adding or removing laundryduring a continuing program. The drumsurface is hot.Canceling the end duration functionIf you want to cancel the end duration settingcountdown and start the program right away:1. Cancel the program by pressing the On/Off button.Turn on the drying machine again by pressing theOn/Off button. When your drying machine turns onfor the first time, it turns on with the declaration(cotton wardrobe dryness) program.2. Select the program you desire using the ProgramSelection knob.3. Start the program by pressing the Start / Pausebutton.5.11 Starting the programStart the program by pressing the Start / Pause button.Start/Pause led and the Drying led light up, indicatingthe program started. The “:” sign in the middle of theremaining duration starts to blink.5.12 Child LockThe machine features a child lock which preventsthe machine program flow from being affected whenbuttons are pressed during operation.When the Child Lock is active, all buttons except for theOn/Off button are deactivated.To activate the child lock, press the Sound Notificationbutton and End Duration button simultaneously for 3seconds.Te child lock should be deactivated to be able to starta new program after the current program ends or tobe able to interfere with the current program. Keep thesame buttons pressed for 3 seconds again to deactivatethe child lock.C The lock led on the screen lights up whenthe Child Lock is activated.C Child Lock deactivates when the machineis turned off and on again using the On/Off button.A warning sound is heard when any button is pressed(except for On/Off button) or the Program Selection knobis turned while the child lock is active.