Defy DHD398 Instruction Manual

Page 11Additional protection by a residualcurrent circuit breaker isrecommended.2. Open the terminal block cover with ascrewdriver.3. Insert the power cable through the cableclamp below the terminal and secure it tothe main body with the integrated screwon cable clamping component.4. Connect the cables according to thesupplied diagram.5. After completing the wire connections,close the terminal block cover.6. Route the power cable so that it will notcontact the product and get squeezedbetween the product and the wall.The power cable must not belonger than 2m due to safetyreasons.Installing the product1. Turning the hob upside down, place it on aflat surface.2. In order to avoid foreign substances andliquids penetrating between the hob andthe counter, please apply the puttysupplied in the package to the contours ofthe lower housing of the hob. Ensure thatthe putty does not overlap.3. Turning the hob correct side up again,align and place it on the counter.4. You can secure your hob to the counter byusing the clamp and the screws supplied.* min. 20 & max. 40 mm# min. 50 mm1 Hob2 Screw3 Installation clamp4 Counter5 Putty6 Separator plate