Defy DHG604 Instruction Manual

Page 13Note.This appliance is supplied ex-factory withjets and air settings for use with LPG gas only.Safety compliance with local requirements.Installer’s details are to be filled in on page 23 ofthis bookTemporary installationFlexible hose connection from the gas appliance tothe cylinder can be made .Ensure that pipe clamps are tightened correctly andare of good quality.x Flexible hose - Not supplied.Any hose that is used to connect the stove to thegas system shall comply with SANS 1156-2 or BS3212.x Gas cylinder - Not supplied.For best results we recommend that gas cylinderswith a minimum capacity of 19kg be used.x Regulator - Not supplied.A 2.8-3.0 kPa LPG gas regulator which complieswith SANS 1237 must be used.Permanent installationImportant information for the userThis appliance may only be installed by aregistered LP Gas installer. All registeredinstallers are issued with a card carrying theirregistration number.Ask to be shown this card before allowing theinstallation to commence and make a note of theinstaller QCC number on page 23 of this book.Upon completion of the installation, the installer isrequired to explain the operational details of theappliance together with the safety instructions. Youwill be asked to sign acceptance of the installationand be provided with a completion certificate. Youshould only sign for acceptance when the installationis completed to your satisfaction.Failure to comply with the above will render thewarranty invalid.Note:Your invoice is required in the event of youwishing to make a warranty claim.