Defy GEMINI SOLID PLATE Owner's Manual

Contents

PAGE 4 OF 12Installation for Solid plate hobsInstallation is the buyer’s responsibility. The manufacturer accepts no liability for thisservice. Any action that the manufacturer has to take as a result of an erroneousinstallation will not be covered by the warranty.x The hob should be installed in a ventilated cupboard fitted with a sturdy worktop andmust be secured using the fixing brackets provided. (see sketch below)x Hobs without control panels should be installed directly above the oven.x Allow an unrestricted air space of at least 75mm underneath the underside of the hobfor ventilation and cooling purposes.x To avoid liquid spills penetrating between the hob and the worktop, please attach therubber ‘U’ seal to the perimeter of the hob. Do not use a silicone sealer.x Invert the hob on the worktop adjacent to the aperture before making the electricalconnection. This will ensure sufficient cable length for subsequent servicing.Fixing methodSuitable for Gemini Black Enamel hobs, Slimline Black Enamel hobs and SlimlineStainless steel hobs.STANDARDCOUNTER TOPHOBSECURING BRACKETAND SCREWSECURING BRACKETAND SCREWHOBTHICKERCOUNTER TOP