Page 9Operational notes continuedAuxiliary function selection.• The machine will restrict certain selections and make it impossible to select allthe auxiliary functions in a single wash programme. For example, if theCOTTON programme is selected, the QUICK WASH and PREWASH can not beselected at the same time.Programme progress display• The progress of the wash cycle may be monitored by observing the lights of thePROGRESS DISPLAY.• The lights will glow sequentially until all the lights are on at the completion ofthe cycle.Adding laundry• Provided the water intake level is not too high, it is possible to stop the machineto add additional laundry.• Press the START / PAUSE / CANCEL button.• The door open indicator lights up after 1-2 minutes. Open the door and add theadditional laundry.• Close the door and press the START / PAUSE / CANCEL button once more forthe machine to continue with the selected programme.• If the door open indicator light does not glow after two minutes, the waterlevel is too high to add more laundry. Press the START / PAUSE / CANCELbutton and allow the programme to continue.Time display• The starting time of any programme maybe delayed by using the time delaybuttons. The delay time may be set atintervals of 30 minutes.• On the display, the delayed time is added to the duration of the programme. Forexample : If the programme duration is 2 hours and 16 minutes and you wish todelay the start by 2 hours then the display will show 4 hours and 16minutes.• After the delay time is set, press the START / PAUSE / CANCEL button.Programme cancelling before the machine has started.• Press and hold the START / PAUSE / CANCEL button for 3 seconds.• Set a new programme and press the START / PAUSE / CANCEL button oncemore.Programme cancelling after the machine has started.• Press and hold the START / PAUSE / CANCEL button for 3 seconds.• Water will drain from the machine. The progress display will move to Spin• The door may be opened after the DOOR OPEN light glows.