Deighton FORMATIC Instruction Manual
                                 | |
(6) SAFETY1. Always disconnect mains supply before servicing, cleaning or changing the drum2. Disconnect mains supply when removing drum and guard3. The machine should not be run when the drum guard is removed4. During operation the hopper guard can be opened to refill. This will automatically stopthe machine5. When replacing the scraper wire remove the assembly from the machine. The machinemust be disconnected from the mains supply before removing assembly.6. No attempt should be made to override the safety switches or run the machine without theguards in place7. Use a 13 amp fuse in the plugEnsure all operatives read these instructions and are fully conversant with the machinesoperations and safety proceduresThese machines are to be operated by one person, in the case where an open hopper is usedthe machine is to be isolated before any attempt is made to put hands in the hopper. Themachine is not to be operated when anyone is reaching into the hopper whether for cleaning,blockages or any other reasons. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine