Deister electronic TranSpeed TSU 200 Wiring And Installation Instruction
                        | |
Contents
| 
6. Installation NotesFor a standard installation in a passenger-car car park, a TSU 200 can be installed eitherbeside the roadway, or above it.6.1 Installation on the side of the road:The reader is mounted on a pole on the driver's side next to the road at a height of 1.8 m– 2.0 m (5.9 – 6.5 ft.). Then the reader is aligned towards the transponder/car windshield.When a ground loop is present, it should be used to trigger the reader. The distance fromthe reader to the ground loop should be in the range of 2.0 m - 2.5 m (6.5 – 8.2 ft.).6.2 Installation above the roadThe reader should not be installed higher than 3.0 m (9.8 ft.) above the road. The distance fromthe reader to the groundloop should be in the range of 1.5 m - 2.5 m (4.9 – 8.2 ft.). The reader isslightly tilted towards the vehicle windshield, so that the reader is almost vertically aligned with thewindshield.Note: The antenna beam of the reader shall in no case be restricted by objects above or belowthe reader. Flush mounting is not recommended! If other types of vehicles (trucks, small cars etc)need to be identified, the reader must be installed and aligned individually.Zulassung_wi_en_ts_tsu-200_pro_v140205_te_bf 136.5 ft. – 8.2 ft.5.9 ft. – 6.5 ft.Ground Loop4.9 ft. – 8.2 ft.max. 9.8 ft.Ground Loop |
Related manuals for Deister electronic TranSpeed TSU 200
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine