Short FormSpecificationsGeneral Definition: LiquiTec™Cold Pans with Eutectic Fluidtechnology allows food in foodpans to be flush with topof counter. Cold pan meetsNSF standard 7; and can bedropped into Delfield Mark 7,Shelleyglas® or Shelleysteel™counters or existing counters.Top: is one-piece 18-gaugestainless steel, with .62” (1.57cm)overhang around perimeter anddie stamped 19.87” x 11.87”(50.5cm x 30.2cm) openingswith depressed edges. Formedwell below each opening is6.25” (15.9cm) deep with .5”drainmanifold to gate valve. Eachwell, flush with the top, for flushmount pans to accommodate12” x 20” (30.5cm x 50.8cm)pans 4” (7.6cm) or 6” (15.2cm)deep supplied by others. Producttemperatures of 33°F (1°C) to41°F (5°C) are maintained at86°F (30°C) ambient roomtemperature, meeting NSF 7requirements.Sides and bottom: areinsulated with high-densityclosed-cell polyurethane.Exterior housing is 22-gaugegalvanized steel.Refrigeration: system usesHFC-404A refrigerant. Eutecticfluid is used as the heat transfermedium. Condensing unit issuspended below the cold panon a 16-gauge steel frame.Temperature control has an OFFposition to shut down the coldpan. Unit is supplied withexpansion valve.A stainless steel louver isprovided for field installation;cutout dimension is 11” x 22”(27.94cm x 55.88cm). A secondopening 11” x 22” (27.94cm x55.88cm) at the rear of thecabinet should be provided atinstallation to allow for proper aircirculation.Electrical system is 115/60c/1phwith NEMA 5-15P plug.Optional Accessoriesand Modifications:• Single or double service flip-upsneezeguards• Relocate compressor• Remote refrigeration(specify refrigerant)LiquiTec™ Drop-In Self-Contained Eutectic Fluid Refrigerated Cold PansModel 8186-EF8100-EFThe Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.comDelfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.PROJECT _____________________________________ITEM NUMBER_________________________________QUANTITY _______________ DATE________________APPROVAL____________________________________