N8600: DROP-IN SELF-CONTAINED HOT & COLD COMBINATION PANProject __________________________Item ____________________________Quantity _________________________CSI Section 11400Model: N8600Drop-In Self-Contained Hot & Cold Combination Pan980 S. Isabella RoadMt. Pleasant, MI 48858www.delfield.comPhone: 800-733-8948Fax: 800-669-0619Email: info@delfield.comApproval _________________Date ____________________SPECIFICATIONSTop: Top is constructed of one-piece 20-gaugestainless steel.Interior: Interior liner is constructed of 18-gauge stainless steel with a 1” (2.54cm) drain.Adjustable stainless steel pan rest for flush mountheating or 2” recessed cooling to accommodateup to 6” (15.2cm) deep 12”x20” pans, suppliedby others. Stainless steel immersion heater(s)installed in bottom for wet only heatingoperation.Exterior: Exterior body is constructed of24-gauge galvanized steel with high densitypolyurethane insulation throughout.Refrigeration: Condensing unit is suspended on a16-gauge galvanized steel frame. Environmentallyfriendly HFC-404A refrigerant is utilized.Temperature controlled by thermostat located next tocondensing unit.Operation: Remote control panel contains 3-wayHot/Cold/Off power switch and thermostat for heatedoperation.Electrical: All units must be hard wired atinstallation.MODELS❑ N8630 30” hot & cold combination pan drop-in❑ N8643 43” hot & cold combination pan drop-in❑ N8656 56” hot & cold combination pan drop-in❑ N8669 69” hot & cold combination pan drop-inOPTIONS AND ACCESSORIES❑ Additional adaptor bars or plates❑ Relocate compressor❑ Remote refrigeration❑ Automatic water fill❑ 220V/50C electrical❑ 3-phase electrical❑ Counter protectors❑ Extended warrantySTANDARD FEATURES• NSF-4 and NSF-7 certified for hot and coldoperation• Stainless steel immersion heaters with stainlesssteel perforated covers• Remote control panel with 3-way hot/cold/offpower switch and thermostat for hot operation• Thermostat for cold operation located next tocondensing unit• Adjustable pan support for flush mounted hotoperation or 2” recessed cold operation• 1’’ stainless steel drain with screen• Stainless steel louver provided• High density polyurethane foam throughout• Push-in flange gasket is standard• Adaptor bars for 12”x20” pans provided• Environmentally friendly HFC-404A refrigerant• Standard 90 day labor and one year partswarranty❑ N8681 81” hot & cold combination pan drop-in