Delfield F18 Series Service And Installation Manual

Also see for F18MC39A: Specification sheet

Contents

Delfield F18 Series Service And Installation Manual Manual pdf 3 page image

F18 Series Service and Installation Manual3For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.comContentsEven though most equipment is shipped crated, care should betaken during unloading so the equipment is not damaged whilebeing moved into the building.1. Visually inspect the exterior of the package an skid orcontainer. Any damage should be noted and reported tothe delivering carrier immediately.2. If damaged, open and inspect the contents with the carrier.3. In the event that the exterior is not damaged, yet uponopening, there is concealed damage to the equipmentnotify the carrier. Notification should be made verbally aswell as in written form.4. Request an inspection of the concealed equipment. Thisshould be done within 10 days from receipt of theequipment.5. Check the lower portion of the unit to be sure legs orcasters are not bent.6. Also open the compressor compartment housing andvisually inspect the refrigeration package. Be sure lines aresecure and base is still intact.7. Freight carriers can supply the necessary forms uponrequest.8. Retain all crating material until an inspection has beenmade or waived.Uncrating the EquipmentFirst cut and remove the banding from around the crate.Remove the front of the crate material, use of some tools willbe required. If the unit is on legs remove the top of the crate aswell and lift the unit off the skid. If the unit is on casters it canbe "rolled" off the skid.Receiving and Inspecting the EquipmentReceiving & Inspecting .........................................................3Serial Number Location ........................................................4Warranty Information............................................................4Regulatory Certifications.......................................................4Specifications.................................................................... 5-7Installation ............................................................................8Operation ..............................................................................9Temperature Settings ..........................................................10Maintenance.................................................................. 11-12Wiring Diagrams ........................................................... 13-16Replacement Part Lists ................................................. 17-20Replacement Part Assemblies ...................................... 21-24Standard Labor Guidelines..................................................25Notes ............................................................................ 26-27