Project __________________________________Item ____________________________________Quantity ________________________________CSI Section 11400Approved _______________________________Date ____________________________________980 S. Isabella Rd.Mt. Pleasant, Michigan 48858 Phone: 800-733-8948 or 989-773-7981Fax: 800-669-0619 www.delfield.comDelfield™ ®Exterior: SS and SA models shall have corrosion resistant stainless steelexterior cabinet sides, front and shroud. SM models shall have corrosionresistant aluminum on exterior cabinet sides and will have stainless frontand shroud. All units shall have the upper shroud hinged with a gas assiststay open feature to provide easy access to the refrigeration system.Interior: Cabinet interior shall be corrosion resistant stainless steel (SSmodels) or heavy gauge aluminum (SA and SM models). Bottom and topsurfaces shall be die stamped to provide radius corners and recessed floor.Three wire shelves are provided per section, SA/SS standard shelves arechrome plated, SM standard shelves are epoxy coated. Shelves rest on clipswhich are adjustable on 1” increments on stainless steel pilasters affixedto the cabinet interior. Pilasters are removable without tools for cleaning.Mounted to the interior ceiling, the interior fluorescent light is controlledautomatically through a switch mounted in the hinge assembly to protectagainst breakage. Door openings are protected with heavy gauge stainlesssteel breaker strips. An air duct shall be mounted to the ceiling assuring lowvelocity, even air movement throughout the cabinet interior.Doors: Double paned tempered thermopane glass. Constructed witha combination of extruded aluminum and PVC. Each door has twoedgemount, self-closing, cam lift style hinges. Doors can be removed fromthe cabinet without the use of tools. Door handle is continuous alongvertical dimension of the door. Door gaskets are magnetic and mount tothe door, snapping in place and removable with out tools. Keyed door lockis mounted to the door. Lock engages into a heavy duty strike mounted tothe cabinet face.Refrigeration system: All components are mounted to the exterior of thecabinet ceiling, outside the food zone and are assembled as one piece andcan be removed as one piece. Environmentally friendly R404A refrigerantis used. The system has the capability of maintaining between -5ºF and0ºF in heavy use food service operations. Refrigerant is metered usinga highly responsive thermostatic expansion valve. System is controlledusing Delfield’s ACT-Advanced Control Technology electronic temperaturecontrol, which provides improved pull down times, reduces compressorcycling and longer compressor life with lower energy consumption.Control system uses adaptive defrost to assure evaporator coil is freeof ice and is operating at optimum efficiency. Evaporator condensate iseliminated using an energy efficient hot gas system.Electrical: Standard electrical on one section units shall be 115V, 60 Hzsingle phase. A 10’ cord and plug is supplied and attached to a junction boxmounted on the exterior top of the cabinet. Two and three section unitsshall be 115/208-230 and will require hardwire connections.SpecificationsStandard Features Options &AccessoriesStainless steel interior and exterior (SS)Stainless steel exterior, aluminum interior (SA)Aluminum interior and exterior, stainless front(SM)Built in door locks with heavy duty strikesPressure relief valve is standard to prevent doorvapor lockExterior digital thermometer with high/lowtemperature alarmEasy to use electronic controlEasy access “flip up” shroudThree wire shelves per section - SA/SS standardwith chrome plated shelves and SM standardwith epoxy coated shelves10’ attached cord and plug on 115V units6” adjustable stainless steel legsStainless steel breaker stripsHigh density foamed in place environmentallyfriendly, Kyoto Protocol Compliant, Non ODP(Ozone Depletion Potential), Non GWP (GlobalWarming Potential) polyurethane keeps energycosts lowEnergy savings door heater switchTwo year parts & labor warrantyFive year compressor warranty••••••••••••••••One section Two section Three sectionSSF1-G SSF2-G SSF3-G Stainless exterior and interior glass full doorSSF1-GH SSF2-GH SSF3-GH Stainless exterior and interior glass half doorSAF1-G SAF2-G SAF3-G Stainless exterior and aluminum interior glass full doorSAF1-GH SAF2-GH SAF3-GH Stainless exterior and aluminum interior glass half doorSMF1-G SMF2-G SMF3-G Stainless front aluminum exterior and interior glass full doorSMF1-GH SMF2-GH SMF3-GH Stainless front aluminum exterior and interior glass half doorModelsSpecification Line®Self-Contained Glass Door Reach-In FreezerSpecification Line®: Glass Door Reach-In FreezerSecurity (prison) package6” polyurethane castersIncandescent lightDoor field rehingabilityAdditional shelvesTray slidesStainless steel backLaminate on front, sides and backBottom mount electricalStainless steel banking stripHeat shield endStainless steel kick plateLaminate kick plate4” stainless steel utility base230-50-1 electrical220-60-1 electrical••••••••••••••••SSF2-G