Dell 1000W User Manual

Also see for 2700R: Quick start guide

Contents

Dell 1000W User Manual Manual pdf 46 page image

46 | OperationIdentificationThe identification screens display the following UPS information: Type and model Part number Serial number UPS firmware Network Management Card firmwareNOTE: The NMC firmware screen displays only if the Network Management Card is installed. See “DellNetwork Management Card“ on page 58.SettingsOnly available options are displayed.User settings are not protected by default. You can enable the password through the User Passwordsetting.Table 7 displays the options that can be changed by the user.Table 7. SettingsDescription Available Settings Default SettingChange Language [English] [French] [German] [Spanish] [Japanese][Simplified Chinese] [Russian] [Korean][Traditional Chinese]EnglishUser Password [Enabled] [Disabled]If Enabled, the default password is USER.NOTE: If you enter an incorrect password, themessage “Wrong Password” appears. Press anybutton to return to the password screen and retrythe password.DisabledAudible Alarms [Enabled] [Disabled]NOTE: If you disable audible alarms, it takes effectinstantly and remains disabled, even after a powercycle. This differs from the mute feature where thehorn is temporarily silenced on any button press,but turns on again if a new alarm is triggered.Enabled