Printer and Paper Storage EnvironmentPaper storage conditions directly affect the feed operation.Ideally, the printer and paper storage environment should be at or near room temperature, and nottoo dry or humid. Remember that paper is hygroscopic: it absorbs and loses moisture rapidly.Heat works with humidity to damage paper. Heat causes the moisture in paper to evaporate, whilecold causes it to condense on the sheets. Heating systems and air conditioners remove most of thehumidity from a room. As paper is opened and used, it loses moisture, causing streaks and smudging.Humid weather or water coolers can cause the humidity to increase in a room. As paper is opened andused it absorbs any excess moisture, causing light print and dropouts. Also, as paper loses and gainsmoisture it can become distorted. This can cause paper jams.Care should be taken not to purchase more paper than can be used in a short time (about 3 months).Paper stored for long periods may experience heat and moisture extremes, which can cause damage.Planning is important to prevent damage to large supplies of paper.Unopened paper in sealed reams can remain stable for several months before use. Opened packagesof paper have more potential for environment damage, especially if they are not wrapped with amoisture-proof barrier.The paper storage environment should be properly maintained to ensure optimum performance. Therequired condition is 20°C to 24°C (68°F to 75°F), with a relative humidity of 4 percent to 55 percent.The following guidelines should be considered when evaluating the paper's storage environment: Paper should be stored at or near room temperature. The air should not be too dry or too humid. The best way to store an opened ream of paper is to rewrap it tightly in its moisture-proofwrapping. If the printer environment is subject to extremes, unwrap only the amount of paperto be used during the day's operation to prevent unwanted moisture changes.Skipped, please register!