Dell 1201MP Owner's Manual

Also see for 1201MP: Setup guide Owner's manual Setup guide Setup guide

Using Your Projector 113Using Your ProjectorTurning Your Projector OnNOTE: Turn on the projector before you turn on the source (computer,notebook, DVD, etc.). The Power button light blinks green until pressed.1 Remove the lens cap.2 Connect the power cord and appropriate cables. For information aboutconnecting the projector, see "Connecting Your Projector" on page 7.3 Press the Power button (see "About Your Projector" on page 6 to locate the Powerbutton). The Dell logo displays for 30 seconds.4 Turn on your source (computer, DVD player, etc.). The projector automaticallydetects your source.NOTE: Allow the projector some time to search for the source.If the "Searching..." message appears on the screen, ensure that theappropriate cables are securely connected.If you have multiple sources connected to the projector, press the Source buttonon the remote control or control panel to select the desired source.Turning Your Projector OffNOTICE: Unplug the projector after properly shutting down as explained in thefollowing procedure.1 Press the Power button twice. The cooling fan continues to operate for 90 seconds.2 Disconnect the power cord from the electrical outlet and the projector.NOTE: If you press the Power button while the projector is running, thefollowing message appears:" Press Power button to Turn Off Projector.Projector must cool down for 90 seconds beforeunplugging or restarting." The message disappears in 5 seconds oryou can press any button on the control panel to erase it.