20 Using Your ProjectorUsing the On-Screen DisplayThe projector has a multi-language On-Screen Display (OSD) that can bedisplayed with or without an input source present.In the Main Menu, press or to navigate through the tabs.In the submenu, press or to make a selection. When an item is selected, thecolor changes to dark gray. Use or on the control panel or the remotecontrol to make adjustments to a setting.8 Video mode The Dell 1800MP Micro-projector has presetconfigurations that are optimized for displayingdata (PC Graphics) or video (movies, games,etc.). Press Video Mode button to toggle betweenPC mode, Movie mode, Game Mode, sRGB, orCUSTOM mode (for user to setup and savepreferred settings). Pressing the Video Modebutton once will show the current display mode.Pressing the Video Mode button again will switchbetween modes.9 Blank screen Press to hide the image, press again to resumedisplay of the image.10 LED light LED indicator.11 Up button Press to select OSD items.12 Enter button Press to confirm the selection.13 Press to adjust the OSD setting.14 Menu Press to activate the OSD.15 Volume Press to decrease the volume.16 Keystone adjustment Press to adjust image distortion caused by tiltingthe projector. (±15 degrees)17 Source Press to switch between Analog RGB, DigitalRGB, Composite, Component-i, S-video, andAnalog YPbPr sources.18 Auto adjust Press to synchronize the projector to the inputsource. Auto adjust does not operate if the OSD(On-Screen Display) is displayed.19 Keystone adjustment Press to adjust image distortion caused by tiltingthe projector. (±15 degrees)