Dell 1815 Mono Laser Service Manual

Also see for 1815 Mono Laser: Owner's manual

Contents

Dell 1815 Mono Laser Service Manual Manual pdf 101 page image

Service ManualTroubleshooting7-87.2.8 Defective Motor operation• Description Main Motor is not driving when printing, and paper does not feed into the printer, resulting 'Jam 0'.Check and Cause Solution1. Motor harness or sub PCB may be defective.2. Perform Engine Test Mode diagnostic code 0 and Checkthe Motor operation.1. Check the Motor harness, replace it, if defective.2. Replace the SMPS, if necessary.7.2.9 No Power• Description When system power is turned on, all lamps on the operator panel do not come on.Check and Cause Solution1. Check if the power input and SMPS output are normal.2. Check for defective of LCD-Panel on the front-cover if theLCD of Panel does not appear after normal warming-up.1. Replace the power supply cord or SMPS.2. Replace the control board.3. Replace the LCD-panel.