Dell 1908FP-BLK User Manual
                                | |
Contents
| 
Troubleshooting:Dell 1908FP-BLK Flat Panel Monitor User's Guidefile:///T|/htdocs/monitors/1908WFP/1908FPBL/en/ug/solve.htm[11/8/2012 12:10:51 PM]mode.Check for bent or broken pins.Sync Problems Screen is scrambled or appears torn Perform monitor reset.Push Auto Adjust button.Adjust Phase and Clock controls via OSD.Perform monitor self-test feature check to determine if scrambled screen appears in self-testmode.Check for bent or broken pins.Boot up in the "safe mode".LCD Scratched Screen has scratches or smudges Turn monitor off and clean the screen.For cleaning instruction, see Cleaning Your Monitor.Safety RelatedIssuesVisible signs of smoke or sparks Do not perform any troubleshooting steps.Monitor needs to be replaced.IntermittentProblemsMonitor malfunctions on and off Ensure monitor is in proper video mode.Ensure video cable connection to computer and to the flat panel is secure.Perform monitor reset.Perform monitor self-test feature check to determine if the intermittent problem occurs inself-test mode.Image Retention(from a staticimage)Faint Shadow from the static imagedisplayed appears on thescreenUse the Power Management feature to turn off the monitor at all times when not in use.Alternatively, use a dynamically changing screensaver left on the monitor for a long period oftime.In OSD Menu, under Reset to Factory Settings, select Enable LCD Conditioning. Using thisoption may take several hours before the image is eliminated.NOTE: Image Burn-in is not covered by your warranty.Product Specific ProblemsSpecific Symptoms What You Experience Possible SolutionsScreen image is too small Image is centered on screen,but does not fill entireviewing area.Perform monitor reset on "All Settings."Cannot adjust the monitor withthe buttons on the front panelOSD does not appear on thescreenTurn off the monitor, unplug the power cord, plug back, and then turn on the monitor.USB ProblemsSpecific Symptoms What You Experience Possible SolutionsUSB interface is not working USB peripherals are not working. Check that your monitor is turned ON.Reconnect the upstream cable to your computer.Reconnect the USB peripherals (downstream connector).Switch off and then turn on the monitor again.High Speed USB 2.0interface is slowHigh Speed USB 2.0 peripherals working slowlyor not at all.Check that your computer is USB 2.0 capable.Verify USB 2.0 source on your computer.Reconnect the upstream cable to your computer.Reconnect the USB peripherals (downstream connector).Troubleshooting Your SoundbarSpecific Symptoms What You Experience Possible SolutionsNo Sound No power to Soundbar - the power indicator is off.(built-in DC power supply. i.e.1908FP-BLK )Turn the Power/Volume knob on the Soundbar clockwise tothe middle position; check if the power indicator (whiteLED) on the front of the Soundbar is illuminated.Confirm that the power cable from the Soundbar is plugged |
Related manuals for Dell 1908FPb
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine