Dell 2330d - Laser Printer B/W User Manual

Also see for Inspiron One 2330: Installation guide Service manual Quick start guide Owner's manual Quick start guide

Contents

Dell 2330d - Laser Printer B/W User Manual Manual pdf 83 page image

Loading PaperSetting the Paper Size and Paper TypeLoading the 250-Sheet and 550-Sheet Paper TraysUsing the Rear ExitUsing the Multipurpose FeederLinking and Unlinking TraysSetting the Paper Size and Paper TypeDell™ 2330d Laser Printer — Attached Locally to a ComputerAfter you set the Paper Size and Paper Type to the correct settings for the size and type used in the trays, then any trayscontaining the same size and type are automatically linked by the printer.NOTE: If the size of the paper being loaded now is the same size as the previously loaded paper, do not change thePaper Size setting.1. Ensure that the printer is on and Ready appears.2. From the operator panel, press the Menu button until Paper Menu appears.3. Press the Select button .4. Press the Arrow buttons until Size/Type appears, and then press the Select button .Select Source appears.5. Press the Arrow buttons until the correct source appears, and then press the Select button .Size appears under the source name.6. Press the Select button .7. Press the Arrow buttons until the correct size appears, and then press the Select button .Submitting Changes appears, followed by Size.8. Press the Arrow buttons until Type appears, and then press the Select button .9. Press the Arrow buttons until the correct type appears, and then press the Select button .Submitting Changes appears, followed by Type.NOTE: You must install the software for your printer before configuring the paper trays. For more information, seeSetting up for Local Printing or Setting up for Network Printing.