Set IP Address UtilityNOTE: This application is not available when the printer is locally attached to a computer. For the SetIP Address Utility to work properly, add an exception to the Windows® Firewall.The Set IP Address Utility lets you set up an IP address and other important IP parameters. To set the IPaddress manually:Connect the network cable, and turn the printer on.Wait for a moment to make sure the IP address is assigned. Print a network setup page. For moreinformation, see Printing a Network Setup Page.1.Click the TCP/IP settings.2.Enter the IP Address, Netmask, and Gateway settings.3.Click Apply.4.Change the Printer IP address Using the Dell Printer Configuration Web Tool.Launch the Embedded Web Server (EWS) by typing your network printer IP address in your Webbrowser.1.Click Configuration.2.Under Printer Server Settings, click TCP/IP.3.Click Set static IP address.4.Enter the IP Address, Netmask, and Gateway settings.NOTE: If you do not know these settings, contact your network administrator.5.Click Submit.6.Enter the new IP address in your browser to continue using the EWS.7.
