Dell 510D Service Manual

Also see for 510D: Quick reference guide User guide

Contents

Dell 510D Service Manual Manual pdf 14 page image

2. Remove the keyboard.3. Remove the display assembly.4. Use a plastic scribe to pry the five display bumpers out of the screw holes located on the front of the bezel.5. Remove the six M2 x 5-mm screws located on the front of the bezel.6. Starting at the edges of the bottom of the display panel, use your fingers to separate the bezel from the top cover by lifting the inside edge of the bezelaway from the top cover.Display Panel1. Follow the instructions in "Preparing to Work Inside Your Computer."2. Remove the keyboard.3. Remove the display bezel.4. Remove the eight M2 x 5-mm screws from the display panel.1 display bumper 4 M2 x 5-mm screws (6)2 support bracket 5 display bumpers (4)3 display panel 6 display bezelNOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel.CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.NOTICE: To prevent damage to components inside your computer, discharge static electricity from your body before you touch any of your computer'selectronic components. You can do so by touching an unpainted metal surface.