Dell 926 All In One Inkjet Printer User Manual

Contents

Dell 926 All In One Inkjet Printer User Manual Manual pdf 86 page image

Check the USB cable for any obvious damage.Firmly plug one end of the USB cable into the printer, and the other end into the computer.Check your network connection.Make sure the printer is connected to a working network connection.Check the network adapter documentation for setup and usage information.Memory Card ProblemsMake sure that the type of memory card you are using can be used in the printer.For more information, see Printing Photos From a Memory Card or USB Key.Insert only one memory card at a time.Do not remove the memory card or touch the printer in the area of the memory cardwhile the light is blinking.The blinking light indicates the printer is communicating with the memory card. Communication errorsmight occur if you remove the memory card or touch the area near the memory card while the light isblinking.Do not insert more than one memory card or USB key at the same time.Make sure the memory card is properly inserted.Insert the memory card until it stops. The printer will not read the contents of the memory card if it is notproperly inserted into the memory card slot.When printing images from a memory card, make sure the file format of the images issupported by the printer.Only images in JPG and a limited set of TIFF formats can be printed directly from the memory card. If youwant to print photos stored on the memory card in a different file format, the photos must be transferredto your computer before printing.Ensure the printer is not connected to a PictBridge-enabled camera.