Dell 948 User Manual

Contents

Dell 948 User Manual Manual pdf 127 page image

Faxingfile:///T|/htdocs/systems/prn948/en/en/d0e7047.html[10/10/2012 11:05:54 AM]What if I have a Digital Subscriber Line (DSL)?DSL delivers digital data to a computer through a telephone line. Your printer is designed to work with analog data. If you arefaxing over a telephone line connected to a DSL modem, install a DSL filter to avoid interference with the analog fax modemsignal.1. Connect the DSL filter to an active telephone line.2. Connect the printer directly to the output on the DSL filter.NOTE: Do not install any splitters between the DSL filter and the printer. Contact your DSL service provider ifyou need more help.Connecting to an Answering Machine1. Connect a phone cord from the FAX connector ( —lower connector) on the printer to an active telephone wall jack.2. Remove the blue protective plug from the PHONE jack connector ( —middle connector).3. Connect a phone cord from the answering machine to a telephone.4. Connect a phone cord from the answering machine to the PHONE jack connector ( —middle connector).NOTE: If phone communication is serial in your country (such as Germany, Sweden, Denmark, Austria, Belgium,Italy, France, and Switzerland), you must remove the blue plug from the PHONE jack connector ( —middleconnector), and insert the supplied yellow terminator for your fax to work correctly. You will not be able to usethis port for additional devices in these countries.5. From the operator panel or the Dell Fax Setup Utility, set the printer to answer fax calls after five rings.From the operator panel:a. Use the left or right Arrow buttons to scroll to FAX, and then press the Select button twice.b. Use the left or right Arrow buttons to scroll to Fax Setup, and then press the Select button .c. Use the left or right Arrow buttons to scroll to Ringing and Answering, and then press the Selectbutton .NOTE: Integrated Services Digital Network (ISDN) and cable modems are not fax modems and are not supported forfaxing.