44 Scanningw w w . d e l l . c o m | s u p p o r t . d e l l . c o m 7 To further customize your scan job, click See More Scan Settings.8 When you are finished customizing your image, click Scan Now.Scanning Photos1 Turn on your computer and printer, and make sure they are connected.2 Load your original document. For help, see "Placing Your Original Document on theScanner Glass" on page 25.3 Click Start→ Programs or All Programs→ Dell Printers→ Dell Photo AIO Printer964→ Dell All-In-One Center.The Dell All-In-One Center opens.NOTE: You can also open the Dell All-In-One Center from the operator panel on your printer. Whenyour printer is in Scan mode, press the Start button . The Dell All-In-One Center opens on yourcomputer.4 Click Preview Now to view your scanned image.NOTE: If the size of the scan (found in the lower right of the preview window) appears in red, you donot have the system resources available to perform the scan at the resolution or size you haveselected. To correct this problem, either reduce your resolution or the size of your scan area.5 Adjust the dotted lines to fit around the portion of the photo you want to scan.6 From the Send scanned image to: drop-down menu, select the photo program you want touse.NOTE: If the program you want to use is not listed, select Search for more... in the drop-down menu.On the next screen, click Add to locate and add your program to the list.7 To further customize your scan job, click See More Scan Settings.8 Change any settings.9 When you finish customizing your image, click Scan Now.When your document has finished processing, it will open in the program you chose.
