Dell Alienware Aurora R3 Service Manual

Also see for ALIENWARE AURORA: Owner's manual Service manual

4. Remove the drive-bay shroud (see Removing the Drive-Bay Shroud).5. Remove full-length PCI-Express card(s), if any (see Removing the PCI-Express Card(s)).6. Disconnect the PCI-fan assembly cable from the connector on the master I/O board.7. Press the tabs and lift the PCI-fan assembly out of the metal brackets on the chassis.Replacing the PCI-Fan Assembly1. Follow the instructions in Before You Begin.2. Align the PCI-fan assembly with the metal brackets on the chassis.3. Slide the PCI-fan assembly into the chassis.4. Connect the PCI-fan assembly cable to the connector on the master I/O board.5. Replace full-length PCI-Express card(s), if any (see Replacing the PCI-Express Card(s)).6. Replace the drive-bay shroud (see Replacing the Drive-Bay Shroud).7. Close the PCI shroud (see Closing the PCI Shroud).8. Replace the left side-panel (see Replacing the Left Side-Panel).9. Connect your computer and all attached devices to electrical outlets, and turn them on.Back to Contents Page1 tabs (2) 2 PCI-fan assembly3 PCI-fan assembly cableCAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so mayresult in damage to the computer.