Scan to Fax ServerFax server will deliver the fax/Email data to send out the job. The Email is automaticallyprocessed by fax server and sent to the given recipient.First, the printer sends the scanned data to the fax server. Then, the fax server uses PSTN tosend a fax/Email data to recipient.To use fax server features as scan to Email, you first need to configure the network settings.See "Embedded Web Service" for network parameters.1 Make sure that your machine is connected to a network.2 Load the document(s) face up with top edge in first into the DADF.ORPlace a single document face down on the document glass.For details about loading a document, see "Loading an Original Document".3 Press All Applicatons( ) Scan to Fax Server from the home screen.4 Enter the remote fax phone number using Direct Input or Fax List.5 Select a server and scan format you want.6 Press Start ( ) from the screen.The printer begins scanning and then sends the email.- 204