2 Installation20Note • Using system credentials to authenticate to an Active Directory LDAP server, you must usethe format “domain\user”.6 Click [Apply].7 Click [Reboot Machine] if prompted.Set Kerberos ServerConfigure the Kerberos server settings for authentication.1 Click [Security] on the [Properties] screen.2 Click [Kerberos Server] under [Remote Autentication Servers].3 Check the [Enabled] box for [Server Certificate Validation].4 On the each menu, make the following settings:• Primary Server Name/IP Address• Primary Server Port Number• Domain Name5 Click [Apply].6 Click [Reboot Machine] if prompted.