Dell D1626HT - UltraScan 1600HS - 21" CRT Display Service Manual

Also see for D1626HT - UltraScan 1600HS - 21" CRT Display: Service manual Service manual

Dell D1626HT - UltraScan 1600HS - 21" CRT Display Service Manual Manual pdf 11 page image

Getting StartedENFESDJC sC tPLResetting the AdjustmentsResetting a specific adjustment:1 Press the MENU button to display the MENU OSD2 Highlight the OSD containing the adjustment you want toreset using the BRIGHTNESS and CONTRAST buttons andpress the MENU button again.3 Press the ¨ (BRIGHTNESS) ./> buttons to select theadjustment you want to reset.4 Press the (RESET) button to reset this specificadjustment.Resetting all of the adjustments forthe current input signalWhile there is no OSD displayed, press the (RESET)button.All of the adjustments for the current input signal are reset tothe factory settings.Adjustments not affected by changes in the input signal (suchas OSD language, OSD position, input signal selection, PowerSaving delay time and the Control Lock function) are not resetto the factory settings.Resetting all of the adjustments forall input signalsPress and hold the (RESET) button for more than twoseconds.All of the adjustments, including the brightness and contrast,are reset to the factory settings.SpecificationsPicture tube 0.25 - 0.27 mm aperture grill pitch,21 inches measured diagonally,90 degree deflectionPhosphor Type P22Transmission Ratio Approx. 39%Faceplate Anti Reflective (AR)/Anti Static(AS) coatingViewable image size Approx. 403.8 × 302.2 mm (w/h)(16 × 12 in.) 19.8” viewing imageResolutionHorizontal Max. 1600 dotsVertical Max. 1200 linesDisplay picture size Approx. 388 × 291 mm (w/h)(15 3 / 8 × 11 1 /2 in.)o rApprox. 364 × 291 mm (w/h)(14 3/ 8 × 11 1/2 in.)Input signalVideo Analog RGB (75 Ω typical)0.7 Vp-p, PositiveSync External HD/VD, CompositePolarity Free TTLVideo Composite (Sync on green)0.3 Vp-p, NegativeDeflection frequencyHorizontal 30 to 107 kHzVertical 48 to 160 HzAC input voltage/current100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 AInrush current 120 VAC/50 A240 VAC/80 APower consumptionMaximum 160 WNominal 120 W, 409 BTU/hDimensions 498 × 505 × 474 mm (w/h/d)(19 5/8 × 20 × 18 3/ 4 in.)Net weight Approx. 31 kg (68 lb 5 oz)Shipping weight 37 kg (81 lb 9 oz)Environmental TemperatureOperating 10˚ to 40˚ C (50˚ to 104˚ F)Non-operating 0˚ to 60˚ C (32˚ to 140˚ F)Environmental HumidityOperating 10% to 80% (Non-condensing)Non-operating 5% to 90% (Non-condensing)Design and specifications are subject to change without notice.Technical FeaturesCustomizing Your Monitor