System informationTable 20. System ConfigurationOption DescriptionIntegrated NIC Allows you to control the on-board LAN controller. The option ‘Enable UEFI Network Stack’ is notselected by default. The options are:• Disabled• Enabled• Enabled w/PXE (default)NOTE: Depending on the computer and its installed devices, the items listed in thissection may or may not appear.SATA Operation Allows you to configure the operating mode of the integrated hard drive controller.• Disabled = The SATA controllers are hidden• AHCI = SATA is configured for AHCI mode• RAID ON = SATA is configured to support RAID mode (selected by default)Drives Allows you to enable or disable the various drives on-board:• SATA-0• SATA-4• M.2 PCIe SSD-0Smart Reporting This field controls whether hard drive errors for integrated drives are reported during system startup.The Enable Smart Reporting option is disabled by default.USB Configuration Allows you to enable or disable the integrated USB controller for:• Enable USB Boot Support• Enable Front USB Ports• Enable Rear USB PortsAll the options are enabled by default.Front USB Configuration Allows you to enable or disable the front USB ports. All the ports are enabled by default.Rear USB Configuration Allows you to enable or disable the rear USB ports. All the ports are enabled by default.USB PowerShare This option allows you to charge the external devices, such as mobile phones, music player. Thisoption is enabled by default.Audio Allows you to enable or disable the integrated audio controller. The option Enable Audio is selectedby default.• Enable Microphone• Enable Internal SpeakerBoth the options are selected by default.Dust Filter Maintenance Allows you to enable or disable BIOS messages for maintaining the optional dust filter installed in yourcomputer. BIOS will generate a pre-boot reminder to clean or replace the dust filter based on theinterval set.• Disabled (default)System setup 23