Dell D1920F User Manual

Contents

Dell D1920F User Manual Manual pdf 3 page image

- 1 -PRECAUTIONSTransporting the monitor1.When carrying the display for repair or service, disassemble the monitor and pack in itsoriginal packing. To disassemble the neck and base, press the "release button" locatedon the back of the neck and detach the neck/base, then remove the base from the neckby pressing the “release tabs” located under the base plate and pull the neck off thebase, finally use the original carton and packing materials to wrap the display and itsaccessories.5.Disconnect the power cable from the power supply if:5.1 You will not use the monitor for an extended period.5.2 The cable is damaged or frayed.5.3 The monitor has been dropped or the cabinet damaged.5.4 A distinct change in performance indicates a need for servicing.Maintenance1.Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergentsolution. Do not use any abrasive materials or solvents such as alcohol or benzene.2.Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such aspens or screwdrivers, as the screen may scratch.3.Do not insert objects or spill liquids into the ventilation ports on the monitor’s rear, asfire, electric shock, and / or unit failure may result.Installation1. Do not cover or block the ventilation ports on the rear of the monitor.2. Do not install the monitor close to heat sources such as radiators or air ducts, or in alocation exposed to direct sunlight, excessive dust, mechanical vibration,or shock.3.The apparatus shall only be used between 5° tilted forward and 15° tilted backward asnormal operation position. If the tilt angle exceeds 15°, it shall be used for wallmounting or packaging only.Information for users applicable in United States of AmericaLAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BERECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE ORFEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONICINDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFICDISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.Power connection1.Use the correct power cord for your local voltage.2.Use an accessible outlet close to the monitor.3.Do not allow anything to rest on the power cable.4.Only use the power adapter attached to the monitor.