Replacing the front I/O-panelWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Procedure1 Slide the front I/O panel into the front I/O panel bay through the front of thecomputer.2 Replace the two screws (M3x5) that secures the front I/O panel to the chassis.3 Connect the front-audio cable, USB 2.0 cable, USB 3.0 cable and USB 3.1 (Type-C) cable to the system board.4 Place the computer in an upright position.Post-requisites1 Replace the front cover.2 Replace the right-side cover.40
