132 Intel® Active Management TechnologyAdvanced FunctionalityNOTE: Additional management software is required for the following features.• Ability to do remote issues remediation (1-to-1) through text-basedconsole redirection (serial-over-LAN) and IDE redirection• Hardened security through agent presence (enables detection of removedagents) and network access control (circuit breaker) and software versioncontrolYour computer aids in troubleshooting iAMT by providing the following iAMT-related error messages:Out-of-Band ManagementOut-of-Band term refers to the ability to manage the computer in the absence ofan operating system or with the operating system in an unusable state, or withthe computer turned off. The only requirement for managing such a computeris the iAMT capability as well as computer being connected to the network andto an electrical outlet.NOTE: Power is supplied to the DIMMs even when the computer is turned off.Accessing iAMT setupIntel's MEBx interface controls the Latitude D630c iAMT features and setupoptions. MEBx is used to:• Turn on or off iAMTError Message DescriptionAMT mode: Setmanageability mode to AMTor noneAlert Standard Format (ASF) mode isenabled instead of iAMT. Setmanageability mode to AMT or None inthe Management Engine BIOSExtension (MEBx) setup.MFG_MODE jumper: Thesecurity override jumperis installedDo not populate the MFG_MODEjumper. iAMT will not function properly.Only Manufacturing uses this jumper.MEMORY: Unsupportedmemory configuration.Populate DIMM1.Unable to launch Management Engine(ME). iAMT functionality is brokenwhen DIMM1 is not populated.
