Dell D90D7 Installation Manual

Also see for D90D7: Quick start guide Quick start guide Quick start guide Quick start guide Quick start guide

Contents

2 Installing D Class FlashThis chapter contains information for users of Wyse D class thin clients who mustinstall new flash.Requirements• Small Phillips screwdriverWARNING: Flash modules may be susceptible to damage by Electro-Static Discharge(ESD). All industry-standard cautions should be followed to avoid ESD. Before youremove or install a module, touch any metal part of the chassis and keep that contactwith the chassis during the installation process.ProceduresCAUTION: Follow all precautions listed in the Quick-Start Guide that came with yourthin client for disconnecting and reconnecting the thin client.1. Perform a proper shutdown of the thin client by closing all files and ending yoursession, and then pressing the power button to turn off the thin client.2. Unplug the power cord and power adapter, and remove any other cables from thethin client, and detach the vertical foot.3. Position the thin client horizontally, where the Wyse logo-side with four flat screwsis facing downward. Using the Phillips Screwdriver, remove the three screws fromthe cover along the back panel edge as shown in Figure 1.Figure 1 Removing the cover screws