Dell DD6300 Hardware Overview And Installation Manual

Also see for DD6300: Manual

Contents

Dell DD6300 Hardware Overview And Installation Manual Manual pdf 46 page image

3. Open the velcro straps to route cables through the CMA. Secure the cables inplace using the velcro straps.4. To adjust the CMA position depth (in or out), pull inward on the orange latches(1) and pull out or push in on the arm simultaneously as needed (2).NoteThe I/O modules, the NVRAM module, the power supply units and the 2.5"disks can be accessed for removal and replacement with the CMA in place.Adjust the depth of the CMA arms to access these modules.Figure 15 Adjusting the CMA depthInstalling the expansion shelves into the racksCAUTIONl Data Domain systems are heavy. Always use two people or a mechanical lift tomove and install a Data Domain system. Use caution to install the expansionshelves.l Ensure that each rack is securely anchored to prevent tipping.1. From the front of a rack, lift the shelf to the designated rack location.Install the System in the Rack46 Data Domain DD6300, DD6800, and DD9300 Systems 6.1 Hardware Overview and Installation Guide