Dell DES12314 Owner's Manual

Also see for D03S: Setup and features information Owner's manual Owner's manual

Option Description• DNS (enabled by default)NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer.ImageServer IP Specifies the primary static IP address of the ImageServer with which the clientsoftware communicates. The default IP address is 255.255.255.255.NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer and whenLookupMethod is set toStatic IP.ImageServer Port Specifies the primary IP port of the ImageServer, which can be used by the client tocommunicate. The default IP port is 06910.NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer.Client DHCP Specifies how the client obtains the IP address.• Static IP• DHCP (enabled by default)NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer.Client IP Specifies the static IP address of the client. The default IP address is 255.255.255.255.NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer and whenClient DHCPis set toStatic IP.Client SubnetMask Specifies the subnet mask of the client. The default setting is 255.255.255.255.NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer and whenClient DHCPis set toStatic IP.Client Gateway Specifies the gateway IP address for the client. The default setting is 255.255.255.255.NOTE: This field is only relevant when theIntegrated NIC control in theSystemConfiguration group is set toEnabled with ImageServer and whenClient DHCPis set toStatic IP.License Status Displays the current license status.Table 12. System LogsOption DescriptionBIOS events Displays the system event log and allows you to clear the log.• Clear Log43