7. If applicable, install the front bezel.Cooling FansYour system supports three cooling fans.NOTE: In the event of a problem with a particular fan, the fan number is referenced by the system’smanagement software, allowing you to easily identify and replace the proper fan by noting the fannumbers on the fan bracket.Removing A Cooling FanWARNING: Opening the system or removing the system cover when the system is on may exposeyou to a risk of electric shock. Exercise utmost care while removing or installing cooling fans.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.CAUTION: Do not operate the system with the cover removed for a duration exceeding fiveminutes.NOTE: The procedure for removing each fan is identical.1. Turn off the system, including any attached peripherals, and disconnect the system from theelectrical outlet.2. Open the system.3. Remove the cooling shroud.4. Disconnect the fan power cable from the power cable connector on the system board.5. Lift the fan out of the cooling-fan bracket.NOTE: When you remove fan 3, ensure that you install the fan Mylar in the fan socket toprevent thermal air re-circulation.34