86 Installing System Components9 Connect any cables to the expansion card.10 Close the system. See "Closing the System" on page 61.11 Reconnect the system to its electrical outlet and turn the system on,including any attached peripherals.Installing an Expansion-Card RiserCAUTION: Many repairs may only be done by a certified service technician.You should only perform troubleshooting and simple repairs as authorized inyour product documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is notcovered by your warranty. Read and follow the safety instructions that camewith the product.1 To install an expansion-card riser, align the riser guides with the riser guideposts on the system board. See Figure 3-13.2 Lower the expansion-card riser into place until the expansion-card riserconnector is fully seated.3 If applicable, reinstall the expansion card. See "Installing an ExpansionCard" on page 84.4 Reinstall the storage controller card. See "Installing the Storage ControllerCard" on page 89.5 Reconnect all cables.6 Close the system. See "Closing the System" on page 61.7 Reconnect the system and peripherals to their power sources.Integrated Storage Controller CardYour system includes a dedicated expansion-card slot on the riser for anintegrated RAID controller card that provides the integrated storagesubsystem for your system’s hard drives. The controller supports SAS harddrives and also enables you to set up the hard drives in RAID configurationsas supported by the version of the storage controller included with yoursystem.
