Dell Dimension 2010 Service Manual

Also see for Dimension 2010: Setup guide

Contents

System Setup 73Boot Device ConfigurationBoot Setting Config • Numlock Key—On; Off (On by default)• Halt on—All, But Keyboard; All Errors(All, But Keyboardby default)Removable DevicePriorityPress Enter for details. This is a dynamic list and isupdated based on the removable devices connected toyour computer.Hard Disk BootPrioritySet the hard drive boot priority, if multiple hard drivesare installed.CD-ROM BootPrioritySet the optical drive boot priority, if multiple opticaldrives are installed.1st Boot Device Removable; Hard Disk; CDROM; Network; Disabled(Hard Disk by default)2nd Boot Device Removable; Hard Disk; CDROM; Network; Disabled(CDROM by default)3rd Boot Device Removable; Hard Disk; CDROM; Network; Disabled(Removable by default)Power Management FeaturesACPI Suspend Type S1(POS); S3(STR) (S3(STR) by default)Remote Wake Up Disabled; Enabled (Enabled by default)Auto Power On Disabled; Enabled (Disabled by default)Auto Power On Date 0Auto Power On Time 0:00:00AC Recovery Last Power State; Power On; Power Off (Power Off bydefault)Load DefaultsLoads the factory default system setup settings.Set Supervisor PasswordAllows you to set a supervisor password of up to eight characters. The supervisorpassword allows you to access your computer and to modify the system setup settings.To disable the supervisor password, leave the Enter Password field blank and press.