Dell Dimension 2100 System Reference Manual

Also see for Inspiron 2100: Installation instructions Start here Setup and features information Service manual User guide

Contents

2. Rotate the power supply.3. Disconnect any cables connected to the card.4. Remove the screw from the card-mounting bracket.5. Grasp the card by its top corners, and ease it out of its system-boardcard connector.6. If you are removing the card permanently, install a metal filler bracketover the empty card-slot opening in the computer.NOTE: Installing filler brackets over empty card-slot openings is necessary tomaintain Federal Communications Commission (FCC) certification of the system.The brackets also keep dust and dirt out of your computer.Memory1 Cutouts (2)2 Connector3 Memory module4 Notches (2)5 Securing clips (2)To install a memory module:1. Remove the computer cover.2. Rotate the power supply.3. If necessary, remove a memory module:a. Press out the securing clip at each end of the memory connector.b. Grasp the module and pull up.