Dell E1909Wb User Manual

Also see for Daily Deal E1909W: Setting up Service manual

Contents

Dell E1909Wb User Manual Manual pdf 26 page image

Removing the StandTo remove the stand:1. Rotate the stand to allow access to the stand release button.2. Press and hold the Stand release button.3. Lift the stand up and away from the monitor.Wall Mounting (Optional)Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following:1. Verify that the power button is turned Off, then disconnect the power cord.2. Lay the LCD display face down on a soft cloth.3. Remove the stand assembly from the back of the LCD display by pressing quick release button.4. Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm x 100 mm distance). (Screw dimension: M4 x 10mm).5. Attach the LCD display to the wall, following the instructions in the wall-mounting kit.NOTICE: Do not use with any device other than Dell Soundbar.NOTE: Soundbar Power Connector +12V DC output is for optional Dell Soundbar only.1. Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor.2. Slide the Soundbar to the left until it snaps into place.3. Connect the soundbar with the power brick.4. Plug the power cable of the brick to a nearby power outlet.5. Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.