Dell E198FP User Manual

Also see for E198FP: Setup guide

Contents

Dell E198FP User Manual Manual pdf 27 page image

Automatic SaveWith the OSD open, if you make an adjustment and then either proceed to another menu, or exit the OSD, the monitor automatically saves any adjustmentsyou have made. If you make an adjustment and then wait for the OSD to disappear the adjustment will also be saved.OSD Warning MessagesA warning message appears on the screen indicating that the monitor is out of sync.This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor touse. See Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1280 X 1024 @ 60Hz.retention. Using the LCD Conditioning feature may take several hours. Severe cases of image retention are known as burn-in, theLCD Conditioning feature does not remove burn-in.Below warning message appears once user select "Enable LCD Conditioning":NOTE: Press any button on the monitor to terminate LCD Conditioning at any time.DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor parameters (brightness, color, balance,etc.) via software applications on your PC.Select Disable to disable this feature.For best user experience and optimum performance of your monitor, keep this feature enabled.NOTE: Use LCD Conditioning only when you experience a problem with image retention.NOTE:If user select 'disable' for DDC/CI,the warning message will appear on screen.Then user can select Yes or No according toneed.Cannot Display This Video ModeOptimum resolution 1280 X 1024 60HzNOTE: The floating 'Dell - self-test Feature Check' dialog will appear on-screen if the monitor cannot sense a video signal.Downloaded from ManualMonitor.com Manuals