Dell EMC N1108EP-ON Getting Started Manual

28 Getting Started GuideFinally, set up the default gateway. Please enter theIP address of the gateway from which this network isreachable. [0.0.0.0]: 10.1.1.1This is the configuration information that has beencollected:SNMP Interface = “public”@10.1.2.100User Account setup = adminPassword = ********VLAN1 Router Interface IP = 10.1.1.200 255.255.255.0Default Gateway = 10.1.1.1Step 6:If the information is correct, please enter (Y) tosave the configuration and copy the settings to thestart-up configuration file. If the information isincorrect, enter (N) to discard the configuration andrestart the wizard: [Y/N] yThank you for using the Dell Easy Setup Wizard. Youwill now enter CLI mode.Applying Interface configuration, please wait...Next StepsAfter completing the initial configuration described in this section, connectany of the front-panel switch ports to a production network for in-bandremote management.If you specified DHCP for the VLAN 1 management interface IP address, theinterface will acquire its IP address from a DHCP server on the network. Todiscover the dynamically assigned IP address, use the console port connectionto issue the following command:• For the VLAN 1 routing interface, enter show ip interface.To access the Dell OpenManage Switch Administrator interface, enter theVLAN 1 management interface IP address into the address field of a Webbrowser. For remote management access to the CLI, enter the VLAN 1management interface IP address into a Telnet or SSH client. Alternatively,continue to use the console port for local CLI access to the switch.