Dell EMC PowerEdge R550 Installation And Service Manual

Also see for EMC PowerEdge R550: Installation and service manual Installation and service manual Reference guide Installation and service manual Installation and service manual

Figure 40. Removing the drive from the drive carrierNext stepsInstall the drive into the drive carrier.Installing the drive into the drive carrierPrerequisites1. Follow the safety guidelines listed in the Safety instructions.2. Remove the drive carrierSteps1. Insert the drive into the drive carrier with the drive connector facing towards the rear of the carrier.2. Align the screw holes on the drive with the screws holes on the drive carrier.3. Using a Phillips #1 screwdriver, secure the drive to the drive carrier with the screws.NOTE: If the drive or SSD carrier has Torx screw, use Torx 6 (for 2.5-inch drive) or Torx 8 (for 3.5-inch drive)screwdriver to install the drive.Installing and removing system components 51