Option DescriptionNetwork Settings Specifies options to manage the UEFI network settings and boot protocols.Legacy network settings are managed from the Device Settings menu.Integrated Devices Specifies options to manage integrated device controllers and ports, specifies related features and options.SerialCommunicationSpecifies options to manage the serial ports, its related features and options.System ProfileSettingsSpecifies options to change the processor power management settings, memory frequency.System Security Specifies options to configure the system security settings, such as system password, setup password, TrustedPlatform Module (TPM) security, and UEFI secure boot. It also manages the power button on the system.Redundant OSSettingsSpecifies the options to configure the Redundant OS settings.MiscellaneousSettingsSpecifies options to change the system date and time.System InformationYou can use the System Information screen to view system properties such as Service Tag, system model name, and the BIOS version.Viewing System InformationTo view the System Information screen, perform the following steps:1 Turn on, or restart your system.2 Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and thenrestart your system and try again.3 On the System Setup Main Menu screen, click System BIOS.4 On the System BIOS screen, click System Information.System Information detailsThe System Information screen details are explained as follows:Option DescriptionSystem ModelNameSpecifies the system model name.System BIOSVersionSpecifies the BIOS version installed on the system.SystemManagementEngine VersionSpecifies the current version of the Management Engine firmware.System Service Tag Specifies the system Service Tag.44 Dell EMC PowerEdge R640 Installation and Service ManualPre-operating system management applications
