Option DescriptionSystemManufacturerSpecifies the name of the system manufacturer.SystemManufacturerContactInformationSpecifies the contact information of the system manufacturer.System CPLDVersionSpecifies the current version of the system complex programmable logic device (CPLD) firmware.UEFI ComplianceVersionSpecifies the UEFI compliance level of the system firmware.Memory SettingsYou can use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions, such as systemmemory testing and node interleaving.Viewing Memory SettingsTo view the Memory Settings screen, perform the following steps:1 Turn on, or restart your system.2 Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and thenrestart your system and try again.3 On the System Setup Main Menu screen, click System BIOS.4 On the System BIOS screen, click Memory Settings.Memory Settings detailsThe Memory Settings screen details are explained as follows:Option DescriptionSystem MemorySizeSpecifies the memory size in the system.System MemoryTypeSpecifies the type of memory installed in the system.System MemorySpeedSpecifies the system memory speed.System MemoryVoltageSpecifies the system memory voltage.Video Memory Specifies the amount of video memory.System MemoryTestingSpecifies whether the system memory tests are run during system boot. Options are Enabled and Disabled. Thisoption is set to Disabled by default.Memory OperatingModeSpecifies the memory operating mode. The options available are Optimizer Mode, Single Rank Spare Mode,Multi-Rank Spare Mode, Mirror Mode, Fault Resilient Mode. This option is set to Optimizer Mode by default.Pre-operating system management applications 39
