Dell EMC PowerEdge XR11 Installation And Service Manual

Also see for EMC PowerEdge XR11: Installation and service manual Installation and service manual

● Restore the service tag, license, and diagnostics information, press Y● Navigate to the Lifecycle Controller based restore options, press N● Restore data from a previously created Hardware Server Profile, press F10NOTE: When the restore process is complete, BIOS prompts to restore the system configuration data.● Restore data from a previously created Hardware Server Profile, press F10● To restore the system configuration data, press Y● To use the default configuration settings, press N● NOTE: After the restore process is complete, system reboots.Manually update the Service TagAfter replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using SystemSetup.About this taskIf you know the system service tag, use the System Setup menu to enter the service tag.Steps1. Power on the system.2. To enter the System Setup, press F2.3. Click Service Tag Settings.4. Enter the service tag.NOTE: You can enter the service tag only when the Service Tag field is empty. Ensure that you enter the correctservice tag. Once the service tag is entered, it cannot be updated or changed.5. Click OK.Trusted Platform ModuleThis is a service technician replaceable part only.Upgrading the Trusted Platform ModuleRemoving the TPMPrerequisitesNOTE:● Ensure the operating system is compatible with the TPM version you are installing.● Ensure that you download and install the latest BIOS firmware on your system.● Ensure that the BIOS is configured to enable UEFI boot mode.CAUTION: The TPM plug-in module is cryptographically bound to that particular system board after it isinstalled. When the system is powered on, any attempt to remove an installed TPM plug-in module breaks thecryptographic binding, and the removed TPM cannot be installed on another system board. Ensure any keys youhave stored on the TPM have been securely transferred.Steps1. Locate the TPM connector on the system board. For more information, see System board connectors.2. Press to hold the module down and remove the screw using the security Torx 8-bit shipped with the TPM module.3. Slide the TPM module out from its connector.Installieren und Entfernen von Systemkomponenten 97