Dell Edge 5000 Series Installation And Operation Manual

Also see for Edge 5000 Series: Installation and operation manual

Contents

Dell Edge 5000 Series Installation And Operation Manual Manual pdf 31 page image

Watchdog TimerThe Watchdog Timer for Windows 10 IoT Enterprise LTSB 2015 is controlled via the BIOS setting. Enter the BIOS during boot bypressing F2. The Watchdog Timer is enabled and disabled under the BIOS setting Watchdog Timer.TPM SupportWindows 10 IoT Enterprise LTSB 2015 supports TPM 2.0. Access the following link for TPM resources: https://technet.microsoft.com/en-us/library/cc749022(v=ws.10).aspxSystem Shutdown and RestartClick the Start Icon and then press Power then Restart or Shutdown the Edge Gateway.LAN/WLAN Network configurationClick the Start Icon and then type Settings and open the Settings window. Select Network & Internet from the settings menu.Bluetooth configurationClick the Start Icon and then type Settings and open the Settings window. Select Devices from the settings menu and then selectBluetooth from the menu on the left panel.LE910 Network configurationFollow the Service Manual to install and configure the WWAN module and the corresponding carrier SIM card for the system. Afterthe WWAN module and the SIM cards are installed:1. Click the Start Icon and then type Settings and open the Settings window.2. Select Network & Internet from the Settings Menu.3. Locate the WWAN connection in the Wi-Fi section and select the entry to connect and disconnect from the WWAN adapter.HE910 Network configurationFollow the Service Manual to install and configure the WWAN module and the corresponding carrier SIM card for the system. Afterthe WWAN module and the SIM cards are installed:1. Click the Start Icon and then type Settings and open the Settings window.2. Select Network & Internet from the Settings Menu.3. Locate the WWAN connection in the Wi-Fi section and select the entry to connect and disconnect from the WWAN adapter.Common port mappingsSerial Port MappingThe table show the serial port mapping on the Edge Gateway 5000/5100 with factory installed Windows 10 IoT Enterprise LTSB2015. For dip switch setting on the Edge Gateway for RS422 and RS485 ports, see DIP Switches.No. Port Type Connector Device Node1 RS232 DB9 COM12 RS422_485 5 pin terminal COM23 RS485 3 pin terminal COM34 RS485 3 pin terminal COM431