Dell External OEMR T710 Technical Manualbook

Also see for PowerEdge T710: Manual Update Hardware installation instructions Hardware owner's manual Update

Contents

Dell External OEMR T710 Technical Manualbook Manual pdf 34 page image

PowerEdge T710 Technical Guidebook30DELLThe device is Broadcom 5709C Gigabit Ethernet controller. The following information details thefeatures of the LAN device:• x4 PCI Express Gen2 capable interfaceo T710 operates dual-port controllers at Gen1 speed• MAC and PHY integrated• 3072x18 Byte context memory• 64 KB receive buffer• TOE (TCP Offload Engine)• iSCSI controller (enabled through an optional hardware key)• RDMA controller (RNIC) (enabled through an optional hardware key)• NC-SI (Network Controller-Sideband Interface) connection• Wake-On-LAN (WOL)• PXE 2.0 remote boot• iSCSI boot• IPv4 and IPv6 support• Bare metal deployment support13 I/O Slots13.1 OverviewThe T710 comes standard with six PCIe (gen 2) expansion slots on the motherboard. A separatededicated slot is provided on the motherboard for the HDD controller. All PCIe slots are x8 connectors,except the x16 slot. Slot specifications are shown below. See the motherboard diagram for slotlocations.• Slot 1 = half length, full height PCIe x4 link• Slot 2 = Full length, full height PCIe x16 link• Slot 3 = Full length, full height PCIe x8 link• Slot 4 = Half length, full height PCIe x8 link• Slot 5 = Half length, full height PCIe x8 link• Slot 6 = Half length, full height PCIe x8 link• Storage slot = PCIe x8 link13.2 X16 Express Card SpecificationsT710 supports x16 cards that meet the following requirements:• Standard height (4.376”)• Full length (12.283”)• Support for full bandwidth of x16 Gen2 link• No support for hot-plug or hot-removal• Maximum power of 25W• T710 provides +12V, +3.3V, and +3.3Vaux in accordance with Power Supply Rail Requirements• x16 slot is not compliant with the PCI Express x16 Graphics 150W-ATX Specification• x16 cards must be compliant with the PCI Express Card Electromechanical Specification Rev2.0