Removing The Slim Optical Drive BlankCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. If installed, remove the front bezel.2. Open the system.3. From the inside of the system, locate the touch point for the slim optical drive blank lock.4. Press the lock and pull the slim optical drive blank out and away from the chassis.5. Close the system.6. If applicable, install the front bezel.Figure 24. Removing and Installing the Slim Optical Drive Blank1. slim optical drive blank2. optical drive blank lockInstalling The Slim Optical Drive BlankCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Align the slim optical drive blank with the slim optical drive bay.2. Slide the optical drive blank into the optical drive bay until the lock clicks into place.3. Close the system.4. If applicable, install the front bezel.61