Installing the Antenna Modules1. Place the antenna module on the chassis.2. Thread the antenna cable around the edges of the computer. Tighten the screws to secure the antenna module tothe chassis3. Install:a) system boardb) power-supply fanc) heat-sink assemblyd) power supply unite) processor fanf) converter boardg) power-button boardh) intrusion switchi) hard drivej) optical drivek) WLAN cardl) input/output board shieldm) system-board shieldn) VESA mount bracketo) back coverp) VESA stand4. Follow the procedures inAfter Working Inside Your Computer.Removing the Camera1. Follow the procedures inBefore Working Inside Your Computer.2. Remove the:a) VESA standb) back coverc) VESA mount bracketd) system-board shielde) input/output board shieldf) WLAN cardg) optical driveh) hard drivei) intrusion switchj) power button boardk) converter boardl) processor fanm) power supply unitn) heat-sink assemblyo) power-supply fanp) system boardq) display panel3. Lift the latch and disconnect the camera cable. Remove the screws that secure the camera to the chassis.39
