Dell Force10 S2410-01-10GE-24P Manual

Also see for Force10 S2410: Quick start guide

8 | The S2410 Systemw w w . d e l l . c o m | s u p p o r t . d e l l . c o m • At least one cable (included) to connect the power source to the S2410 AC power supply• Brackets and screws (included) for front-mounted rack installation (#2 Phillips screwdriver required butnot included)• Console port: Rollover cable (RJ-45 connector) and terminal adapter (DB-9 to RJ-45) (supplied) (Forpinout and terminal settings, see Accessing the Console Port on page 23.)Features• 24 line-rate 10 GbE ports (See Ports for details.)• CPU and switch processor• Flash memory• Standard 1U chassis height by 19-inch rack-mountable width• Several rack attachment options; front-mount brackets standard• Seven built-in fans on the left side (see Fans and Airflow on page 12)• Load-sharing redundant internal AC power supplies• Up to 16000 MAC address entries supported with hardware assisted aging• Supports 9000 jumbo frames• Back-pressure support at half-duplex, IEEE 802.3x flow control at full duplex• Extensive LEDs for per-port and system statuses (see LED Displays on page 9)PortsS2410CP:• 20 fixed 10GbE BaseCX4 ports• 4 ports for optional 10G XFP transceivers (needs XFP optics)• 1 RJ-45 console port with RS-232 signaling• 1 RJ-45 10/100 dedicated Ethernet Management port (labeled 10/100 Ethernet)S2410P:• 24 fixed 10GbE XFP ports (needs XFP optics)• 1 RJ-45 console port with RS-232 signaling• 1 RJ-45 dedicated Ethernet Management port (labeled 10/100 Ethernet)For details on using ports (console, CX4, Ethernet Management, and XFP), see Chapter , Accessing Ports,on page 23 .